Specifications

14 Chapter 3
AutoPower={no, yes} Yes/no option on how the system starts when the power is first applied to
the thin client.
If set to yes, then the system starts itself without waiting for users to press
the power button (only in cases where the power was lost unexpectedly; if
the thin client was shut down properly before power was lost unexpectedly,
when the power is restored, the thin client will remain powered off). This
setting is useful in a kiosk environment.
Once an AutoPower statement is processed, it alters the behavior of the thin
client until a countermanding statement is processed. The effect of an
AutoPower=yes statement continues even if the statement is removed from
the INI file in which it was found.
Use of the AutoPower option does not interfere with performing a user
directed shutdown.
Community=community Specifies the SNMP community name. Maximum of 31 characters are
allowed in a string. Once specified, it is saved in the non-volatile memory.
DefaultUser={username, $SYS_VAR} Specifies the default sign-on user.
See Table 1 for a list of system variables for $SYS_VAR.
DelCertificate={filename, all} Removes the named file from the nand flash or from the memory. If
DelCertificate=ALL, then all certificates (except built-in certificates) will be
deleted from the flash.
DesktopColorDepth={16, 32}
[RGB565={no, yes}]
DesktopColorDepth — Sets the desktop color to 16 or 32 bits. If
DesktopColorDepth=16, the default color is 15 bits.
RGB565 — Applies only if the desktop color is using 16 bits (valid for V10L
and S10).
CAUTION: If the RBG565 parameter value is changed to yes, the thin client
will require a reboot.
DHCPExpire={reboot, shutdown} When a DHCP lease expires, a message notifies the user as follows:
“DHCP Expired, you must reboot.”
reboot — After 5 seconds, the system reboots.
shutdown — After 5 seconds, the system shuts down.
DHCPOptionsRemap={no, yes}
[DisableOption12={no, yes}]
[FileServer={128 to 254}]
[RootPath={128 to 254}]
[FtpUserName={128 to 254}]
[FtpPassWord={128 to 254}]
[RapportServer={128 to 254}]
[RapportPort={128 to 254}]
[PnliteServer={128 to 254}]
[DomainList={128 to 254}]
[VDIBroker-{248 to 254}]
[RapportSecurePort={128 to 254}]
DHCPOptionsRemap — Specifies whether or not the following options can
be set.
The value for each option must be from 128 to 254. Values for the options
must be different for each option. These options are used to configure
DHCP server tags for thin client booting.
NOTE: The DisableOption12 option sets whether or not the Option12 tag is
accepted. By default, DHCP option 12 sets the hostname and domain name
of the terminal. For example, if the option 12 information is
terminalname.wyse.com, the terminal name will be set as terminalname and
the domain name will set as wyse.com. If the DisableOption 12 setting is
different than the value in NVRAM, the system will automatically reboot to
make the value valid.
NOTE: RapportSecurePort is the specified HTTPS port of the WDM server.
[DHCPUserClassID=class_id
{ParseVendorInfo={no, yes}]
DHCPUserClassID — Specifies the UserClassID used for DHCP.
ParseVendorInfo — Yes/no option to specify whether or not WTOS will
interpret DHCP option 43 (vendor-specific information). If the
DHCPVendorID is also used is also used with this parameter, you must set
ParseVendorInfo=yes and then reboot the thin client twice. Maximum of 26
characters are allowed in a string.
Table 2 Parameters for wnos.ini files only , Continued
Parameter Description