Specifications

WNOS INI Only Parameters 17
RegisterWINS=yes Forces the thin client to register itself with a Microsoft WINS server.
RootPath=FTP root path This FTP root path is entered into thin client local setup (non-volatile
memory). The thin client immediately uses this path to access files. The
directory name \wnos will be appended to the FTP root path entry before
use.
SelectServerList={VDM,PNA};List of
description and server
If set, provides the user with a list of servers to select from during logon.
[Introduced in build 6.4.0_08]
NOTE: Be sure to use a comma “,” or a semi-colon “;” to separate different
servers and to use a dash “-” to separate the server description and the
server IP address/location.
For example: SelectServerList=PNA;tester-10.151.122.41;Latin
America-https://latam.wyse.com;Europe-https://emea.wyse.com;
Service={snmpd, thinprint, vncd, wdm,
<port number>} disable={no, yes}
Service — Specifies the services you can enable or disable (there are
different syntaxes for the different services).
disable — Yes/no option to disable the services. disable must be followed
by “Service=”.
Service=snmpd disable={no, yes}
{community=<snmp community>}
Service=snmpd disable — Yes/no option to disable the snmpd service.
community — Same as the statement “Community.”
Service=thinprint disable={no, yes}
[port=<port number>]
[PkSize={0-64000}]
Service=thinprint disable — Yes/no option to disable the thinprint service.
port — Same as the statement “ThinPrintEnable={no, yes} port=port
number.”
PkSize — Specifies the default packet size that will be sent to the server
when negotiating with the thinprint server. The value 0 will rely on the server
default setting, 64000 in ThinPrint 7.6 and 32000 in previous ThinPrint
versions. WTOS only allocates a buffer of 64K, so if the default packet size
of the server is above 64000, this setting must be set or printing will fail.
Service=vncd disable={no, yes} Yes/no option to disable the vncd service (same as “MaxVncd={0, 1}”).
Service=wdm disable={no, yes} Yes/no option to disable the WDM service (same as “RapportDisable={no,
yes}”).
Service=<port number> disable={no,
yes}
Yes/no option to disable the service with this port number. The 80 port is an
exception because the Wyse Device Manager (WDM) is always started
before loading the global profile (wnos.ini file).
Table 2 Parameters for wnos.ini files only , Continued
Parameter Description