Specifications

34 Chapter 4
**Seamless={no, yes}
[HideTaskbar={0, 1, 2, 3}]
[FullscreenReserved={no, yes}]
Seamless — Yes/no option to set the default resolution for ICA published
applications to Seamless for ICA connection parameters.
HideTaskbar — Specifies the status of the taskbar when maximizing the
seamless window.
0 — Do not hide the taskbar
1 — Taskbar will be hidden when maximizing the seamless window to full
screen. Moving the mouse over the lowest bottom of the screen will display
the taskbar. This setting (not including the FullscreenReserved parameter)
in a wnos.ini file will will be saved into NVRAM if EnableLocal=yes is set in
the wnos.ini file.
When set Seamless=yes HideTaskbar=2, it removes the auto-hide taskbar
function but it reports the full resolution to the ICA server in a similar way to
HideTaskbar=1.
When set Seamless=yes HideTaskbar=3, the maximized size does not
cover the taskbar, but the session size on the server side is reported as the
full-screen size.
When set Seamless=yes FullscreenReserved and the applications are
configured for fullscreen mode, they will be launched in fullscreen mode, not
seamless mode.
Serial={COM1, COM2, COM3, COM4}
[Baud={1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200}]
[Parity={None, Even, Odd}]
[Stop={1, 1.5, 2}]
[Size={5, 6, 7, 8}]
[Flow={None, XON/XOFF, CTS/RTS,
Both}]
[Touch={no, yes}]
[Touch_XYReverse={no, yes}]
[Touch_type={elo, microtouch,
fastpoint}]
Serial — Specifies the local serial ports configuration.
Baud — Specifies the local serial port baud rate.
Parity — Specifies the local serial port parity.
Stop — Specifies the local serial port stop.
Size — Specifies the local serial port size.
Flow — Specifies the local serial port flow.
Touch — Yes/no option to denote that a serial touch screen is attached.
Touch_XYReverse — Yes/no option to denote a reversal of the X and Y
coordinates (needed for some touch screens).
Touch_type — Specifies the type of touchscreen being used.
NOTE: Parameters must be specified in the order shown.
Table 3 Parameters for wnos.ini files and {username}.ini files , Continued
Parameter
*
Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description