Specifications

36 Chapter 4
**ShutdownCount={0 to 60} (seconds)
or
**ShutdownCounter={0 to 60} (seconds)
ShutdownCount or ShutdownCounter — Specifies the number of seconds
to count down before the shutdown sequence starts upon using the thin
client power button when there are active sessions (default is10, however,
to commence shutdown immediately and prevent the display of the
countdown pop-up dialog box, set the value to 0.
ShutdownInfo={no, yes} Yes/no option to display various information (such as System Version,
Terminal Name, IP Address, and MAC Address) in shutdown window.
S10WDMFlash=flash size Specifies the flash size. This value will be saved into NVRAM and then
reported to the WDM server.
NOTE: This statement guarantees that all S10 thin clients function with DDC
regardless of flash size.
TimeServer=server_list
[TimeFormat={24-hour format, 12-hour
format}]
[DateFormat={yyyy/mm/dd, mm/dd/
yyyy, dd/mm/yyyy}]
[GetBiosDT={no, yes, 0, 1}]
TimeServer — Specifies the SNTP time servers to use for time retrieval.
TimeFormat — Specifies the time format to use.
DateFormat — Specifies the date format to use. [Introduced in build
5.0.014]
NOTE: The TimeFormat and DateFormat settings in a wnos.ini file will be
saved into NVRAM if EnableLocal=yes is set in the wnos.ini file. [Introduced
in build 5.0.010]
GetBiosDT — Yes/no option to obtain time from BIOS/CMOS when the
timeserver is not available or cannot be contacted. [Introduced in build
6.3.0]
**UniSession={no, yes} Yes/no option to launch the connection only once at a time.
VDIBroker=vdi_broker_url Specifies the VDI broker server (supports both http and https). If the
vdi_broker_url does not start with http or https, the default protocol used is
http. For an https connection, only one URL is accepted.
CAUTION: If the VDIBroker parameter value is changed, the thin client will
reboot without notice to the user so it can reconnect to the new server.
VirtualCenter=virtual_center_url Specifies the Virtual Center server (supports both http and https). If the
virtual_center_url does not start with http or https, the default protocol used
is http.
CAUTION: If a VirtualCenter in an INI file is different from the original URL,
the thin client will reboot for the new URL to take effect.
NOTE: Only this setting can enable the Virtual Center functions.
**VNCPrompt={no, yes}
[{Accept, Reject}={10 to 600} (seconds)]
[ViewOnly={no, yes}]
[ActiveVisible={no, yes}]
VNCPrompt — Yes/no option to enable a VNC shadowing prompt to a user
(VNCPrompt set to yes means the user will always be prompted before
shadowing starts and the user will then decline or accept VNC shadowing;
VNCPrompt set to no means the user will not be able to decline or accept
shadowing).
Accept, Reject — Specifies the amount of time (in seconds) a user has to
accept or reject the VNC shadowing prompt before the client desktop is
shadowed.
ViewOnly — Yes/no option to specify that the desktop being shadowed can
only be viewed by the person who is shadowing (no keyboard or mouse
events are allowed to interfere with the thin client being shadowed).
ActiveVisible — Yes/no option to display a VNC session-end notice after the
VNC session ends.
Table 3 Parameters for wnos.ini files and {username}.ini files , Continued
Parameter
*
Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description