How-To Guide

Front of ring
3
1
2
4
Data Collector
2
1
3
1. Charging port: the red light stays on when charging.
2. Switch: OFF to shut down, ON to start
3. Indicator light: green light flashes when not connected/green light
stays on when connected
4. Strap: tie the strap on the thigh with the data collector facing
outward
Equipment power: 3 hours charging, 12 hours using, if insufficient Equipment power: 3 hours charging, 12 hours using, if insufficient
power, the red light flashes, please recharge in time.
Power saving mode: if the fitness ring is not connected to Bluetooth or
not used within 2 minutes, it will enter hibernation state, you need to
turn on the device switch again. Keep the charging port facing the
athlete when the fitness ring is turned on.
Smart Fitness Ring App download
For Android & iOS:For Android & iOS:
Smart Fitness Ring
Smart Fitness Ring
Instructions
1. After starting the game app, register a dedicated account and log in.
After entering the exercise interface, the bluetooth connection screen
will be displayed, select ZTYN-JSH-****** to connect, the interface
shows that the bluetooth connection is successful, indicating light is
steady green.
2. If the connection fails during use, it may be due to insufficient power 2. If the connection fails during use, it may be due to insufficient power
of the device, or the device's bluetooth is not turned on, etc.
3. During exercise, if the fitness ring not working or working inaccurately,
please face up the charging port of the fitness ring and place it flat for
3 seconds to reset. If you need to pause or exit, you need to hold the
fitness ring flat for 6 seconds to pause or return to the main interface.
Common issues
How to unbind/match the fitness ring?How to unbind/match the fitness ring?
Click the homepage setting button to enter the setting interface, click
"Unbind" to release the fitness ring, Click "Connect Device" to connect a
new fitness ring. If the ring body or data collector needs to be replaced in
the equipment, turn on the ring's power switch, click settings, enter any
number of channel numbers (10-100), if there are multiple settings. The
interval between the two values must be 5 or more. For example, A is 10,
and B is 15. After the red and green lights flash alternately on the ring, and B is 15. After the red and green lights flash alternately on the ring,
restart the date collector at this time and wait for the green light to stay
on, that is, the code pairing is successful.
If the green light is off or still flashes, you can try to pair again.
Can't run the app after installation?
The app requires Android system version 4.4 or higher, Bluetooth 5.0 or
higher, and enough memory, if it appears phenomena such as installation
failure or freeze, indicating that the phone is not suitable for this app.failure or freeze, indicating that the phone is not suitable for this app.
The phone can't cast screen?
The mobile phone uses wireless projection app for TV or other equipments.
if the projected device shows lagging, that is due to external hardware
mismatch, please change another projection environment or equipment
or both and try again
Can't find the bluetooth device?
It appears that the bluetooth device cannot be found, you can check if the It appears that the bluetooth device cannot be found, you can check if the
bluetooth function of the mobile phone is turned on, if it is not turned on
, you need to manually turn it on.