1. Installing and Replacing Case Rails CAUTION: For the iPod classic 160GB to fit into the case you must replace the thick black rails that come installed in the housing with thin grey rails which are included in this bag. *If you are unsure which rails you need or if you need rails please contact H2O Audio* NOTE: Be very careful, do not damage the T - Seal with the screwdriver. 1. Use the small Phillips Screwdriver in a counterclockwise direction to remove all three ( 3 ) screws from the black rail. 2.
2. Rail Information Note: The iV6 Waterproof Case is made to accommodate both 80GB and 160GB versions of the iPod classic. The rails for the 160GB iPod classic are thinner then the default rails. Black 80GB Rails come installed in the case Grey 160GB Rails included in this bag Rails can be identified by color and by the text that has been molded into the bottom of the rail.
3. Introduction 2. Case Features The H2O Audio waterproof case lets you to listen to digital audio during active watersports. It houses the Apple iPod classic digital media player. SealTightTM Connector Armor Series h2oaudio.com Display Window iV6 Waterproof Case for the iPod® classic Case: The case features the LatchTightTM Locking System which keeps the unit waterproof during operation.
8. Connecting the Headphones TM The SealTight Connector only featured on H2O Audio Cases, is what keeps your audio connection safe and dry underwater. It is designed specifically to create a seal around the H2O Audio Series Waterproof Headphones (sold separately). Using any other headphones will not have a complete waterproof connection, and reduces the waterproof rating to water-resistant. 9.
