User Manual

2
Programming Instructions
1. Launch the X-keys Basic Setup program
2. Select your X-keys from the list of recognized devices
3. Click on a key or port to begin programming
4. When programming is complete, select File > Write to Device,
or click the Write to Device Icon
5. Save your programming file if you plan to program multiple X-
keys or modify the programming in the future
6. Return your X-keys to operating mode by unplugging it from the
USB port and plugging in again
Once programmed, the X-keys may be plugged into any system and it will play
back programmed keystrokes just like any standard USB keyboard.
Backlighting
The X-keys Sticks have one backlighting color (blue) while the other X-keys
have two (red and blue). The factory setting is blue at full intensity. You may
change the intensity level or turn on or off either set of LEDS with the
backlighting option in X-keys Basic Setup.
Support
Should you encounter difficulty with the installation or programming, please
contact our technical support department.
E-mail: [e-mail] Phone: [phone]
Compatibility
X-keys USB devices are compatible with any computer or host system which
supports USB HID Keyboard input. For more information contact our
Technical Support Department ([e-mail]).
Identifying the Keys
Select appropriate icons or use the blank legend sheet to create your own key
legends. Other options are available for printing legends for multiple units.
Contact our Sales Department ([e-mail]) for more information.
Horizontal and Vertical Double-keys (not compatible with X-keys Sticks)
The included double-keys replace two single keys on the X-keys. To install a
double key cap, remove two adjacent keys with the provided key-puller.
Pressing the key puller over an adjacent key and working it under the cap to
be removed is the recommended method. Press the double-key in place over
the two exposed switch stems.