User Guide

1-Port Wired Print Server

Page | 5

Click No if you want the print server to keep using the default IP address and keep the default

settings, and then click Next.

 IP address: 192.168.0.10

 Subnet Mask: 255.255.255.0

Click Yes if you want to change IP address to the print server, and then click Next.

7. On the Select A Printer screen, select an already configured printer from the list, click Next

and then Finish to complete the installation.

Select Add New Printer if the print server is connected to a printer that hasn’t been installed

before and does not appear in the list.

Note:

1. The IP address of print server must be within the same subnet as your network adapter.

2. After you save the new IP address, the print server will automatic reboot once to make

ready for the new IP address. It may take a couple of seconds.