User's Manual

Operation Menu

2. Mode button

Pressing 1 second to turn the device to set the WiFi to be managed mode and try to

establish a new link with WiFi AP named SBMAMA, the name/SSID of WiFi AP can

be configured by field of SSID on HTTP control panel. If it failed to establish a link

with the AP within 30 seconds, then it will switch to ad-hoc mode with SSID

SBMAMA. Pressing the Mode button for 1 second will turn the device back to

managed mode again.

Pressing 5 seconds to turn the device to Install mode, and showing in formations

including Networking mode, Mac address, IP address, SSID, Networking status and

Feed URL to be display.

Pressing 10 seconds to turn the device to reboot. If the device is connected using the

USB interface to a PC with specific software named NandPDT to perform firmware

update, reset to factory default. Please refer to section 5. Firmware upgrade.