User's Manual

Operation Menu
4
4. HTTP control panel
Open the device HTTP control panel by http://the.device.ip.address on browser like
Microsoft Internet Explorer.
4.1 System Parameters
FW_Version A display only data field shows the firmware version
on photo frame.
Active_Mode A display only data field shows the active mode on
photo frame.
There are install, Operating and Maintenance modes.
Networking_Mode A display only data field shows the Networking mode
on photo frame.
There are WiFi Managed, WiFi Ad-Hoc and LAN
modes.
MAC_Address A display only data field shows the MAC address of
photo frame.
IP_Address A display only data field shows the IP address of
photo frame.
Status A display only data field shows the networking status
of photo frame.
There are Connected and Disconnected status.
Login_ID A text edit field allows users to manage the login
identification of HTTP control panel, maximum 20
characters.
Default to the MAC address of photo frame on format
of xxxxxxxxxxxx.
Login_Password A text edit field allows users to manage the login
password of HTTP control panel.
Default to an empty string.
Light_sensor_level
Level 9 - 0
Text edit fields allow users to manage the ambient
light sensor detect value in range of 0% to 100%.
LCD_backlight_level
Level 9 - 0
Text edit fields allow users to manage the backlight
strength in range of 0% to 100%.
On
Level 9 - 0
Radio buttons allow users to set the light level to turn
on the backlight of photo frame.
Off
Level 9 - 0
Radio buttons allow users to set the light level to turn
off the backlight of photo frame.
Press Submit button to update the parameters to photo frame.