User's Manual

Operation Menu
5
4.2 Networking Parameters
IP_Select Radio buttons allow users to set IP address
on either Auto (DHCP client) or Specific (Fix
IP).
Default to Auto mode.
IP_Addr Text edit field allows users to set IP address
under Specific IP mode, in format of
xxx.xxx.xxx.xxx
Mask Text edit field allows users to set Mask under
Specific IP mode, in format of xxx.xxx.xxx.xxx
Gateway Text edit field allows users to set Gateway
address under Specific IP mode, in format of
xxx.xxx.xxx.xxx
DNS1 Text edit field allows users to set first DNS
address under Specific IP mode, in format of
xxx.xxx.xxx.xxx
DNS2 Text edit field allows users to set second DNS
address under Specific IP mode, in format of
xxx.xxx.xxx.xxx
LAN_Port Radio buttons allow users to enable or
disable the Ethernet interface. Default to
Disable mode.
SSID Text edit field allows users to manage the
SSID of WiFi network.
Maximum 20 characters, default to
SBMAMA.
Stand_seconds_at_Install_Mode Text edit field allows users to set the display
duration in second for install mode. If the
networking status is connected then photo
frame will move to operating mode after it.
Authentication Radio buttons allow users to select the
authentication method on WiFi. There are
mode NONE, WEP, WPA and WPA2.
Default to NONE.
WEP_Key Text edit field allows users to set the
encryption key for WEP mode, maximum 20
characters.
WPA_PSK Text edit field allows users to set the
encryption key for WPA and WPA2 mode,
maximum 20 characters.