User's Manual Part 1

USER’S MANUAL OF X-Micro WLAN 11b ACCESS POINT Version: 2.0

2 Installation

2.1 Hardware Installation

Step One: Place X-Micro WLAN 11b Access Point to the best optimum transmission

location.

The best transmission location for your X-Micro WLAN 11b Access Point is

usually at the geographic center of your wireless network, with line of sign to all of

your mobile stations.

Step Two: Connect X-Micro WLAN 11b Access Point to your wired network.

Connect X-Micro WLAN 11b Access Point by category 5 Ethernet cable to your

switch/ hub/ router/ xDSL modem or cable modem. A straight-through Ethernet

cable with appropriate cable length is needed.

Step Three: Supply DC power to X-Micro WLAN 11b Access Point.

Use only the AC/DC power adapter supplied with X-Micro WLAN 11b Access

Point; it may occur damage by using a different type of power adapter.

The hardware installation finished.

2.2 Software Installation

 There are no software drivers, patches or utilities installation needed, but only the

configuration setting. Please refer to chapter 3 for software configuration.