User's Manual

3
HARDWARE INSTALLATION
LED Indicator
Power (PWR)
The PWR indicator lights green while the Wireless PCMCIA Card is connecting
to the Cardbus or PCMCIA slot, otherwise, it is off.
ACT (Activity)
The ACT indicator blinks green when the Wireless PCMCIA Card is connected
to a network successfully and transmitting data. Otherwise the indicator is off
whiles the Wireless LAN is stand by.
Check the installation
The LEDs of the Wireless PCMCIA Card are clearly visible and the status of the
network link can be seen instantly:
1. Once the device is plugged to the station’ s Cardbus slot, the PWR LED of the
Wireless PCMCIA Card will light up indicating a normal status.
2. When the device plugged to the station’ s Cardbus slot and the driver was
installed, the ACT and PWR LED will start alternate blinking, it means that the
device is starting to scan the wireless devices near the Wireless PCMCIA Card.
3. While the Wireless PCMCIA Card linked up and transmitting data to the
Access Point or to other Wireless LAN station, the ACT LED will start blinking.