User's Manual

3.5.2 Virtual Server
This screen enables you to create a virtual server via the router. If the router is set as a
virtual server, remote users requesting Web or FTP services through the WAN are
directed to local servers in the LAN. The router redirects the request via the protocol
and port numbers to the correct LAN server. The Virtual Sever profiles are listed in
the table at the bottom of the page.
Note: When selecting items in the table at the bottom, click anywhere in the item. The
line is selected, and the fields automatically load the item's parameters, which you can
edit.
Enable: Click to enable or disable the virtual server.
Name: Type a descriptive name for the virtual server.
Protocol: Select the protocol (TCP or UDP) you want to use for the virtual server.
Private Port: Type the port number of the computer on the LAN that is being used to
act as a virtual server.
Public Port: Type the port number on the WAN that will be used to provide access to
the virtual server.
LAN Server: Type the LAN IP address that will be assigned to the virtual server.
Add: Click to add the virtual server to the table at the bottom of the screen.
Update: Click to update information for the virtual server if you have selected a list
item and have made changes.
Delete: Select a list item and click Delete to remove the item from the list.
New: Click New to erase all fields and enter new information.
3.5.3 Special AP
This screen enables you to specify special applications, such as games, that require
multiple connections that are inhibited by NAT. The special applications profiles are
listed in the table at the bottom of the page.
Note: When selecting items in the table at the bottom, click anywhere in the item. The
line is selected, and the fields automatically load the item's parameters, which you can
edit.
Enable: Click to enable or disable the application profile. When enabled, users will
be able to connect to the application via the router WAN connection. Click Disabled
31