User's Manual

8.6.2 Priority Scan
At the Scan mode, the LCD displays “○
S
” icon. The Radio scans the
channel in the sequence of P, S1, P, S2, P, S3,.... at the priority scan mode.
During receiving signal through the common channel, the Radio scans the priority channel
periodically and if the Radio detects the Priority channel, it starts receiving the channel.
During receiving the signal, you can move to the following scan channel by pressing the
UP(▲) or DOWN button(▼).
8.7 Key Lock function
During pressing the Menu button (P) at the receiving standby mode, press the UP button
(▲) and then, the Key Lock function will be executed and the key icon of LCD will
appear. At this situation, the other keys except for the PTT and the Monitor key will not be
operated. In order to release the Lock function, press the Menu button(P) and during
pressing the button, press the DOWN button(▼).
8.8 2TONE / 5TONE function
1) 2TONE
You can use the private and group tone functions by the central control system which is
using the 2TONE SIGNALING. If the Radio receives the tone signal, the Radio will make
a Beep sound which is advising the tone signal status and which means the Radio is ready
to talk.
2) 5TONE
The set-up of 5TONE is made by PC programming. Call Name and ID can be the setting up to 200
pieces and set their own ID. And also it allows displaying their ID to the other party at the time of
transmission. You can choose 5 Tone Format among ZVEI , CCIR, EEA, PZVEI, DZVEI, PCCIR,
PDZVEI, NATEL and it can be set to Manual.
8.9 Emergency Call function
This Emergency call is used for calling the party in emergency and if pressing for about 2 seconds
the button in Orange color on the top side of Radio, the Emergency Call is transmitted.
In case of setting to the emergency call channel (available by PC programming) with your ID at the
general mode or if the Radio is in the call mode, you can make an Emergency Call by pressing the
button in Orange color for about 2 seconds.
14