User's Manual

8.10 STUN function
If a lost the radio or you do not want someone use your radio, it can be disable the radio through
receiving of STUN ID stored in the radio. (The Stun ID can be set up by PC Program.) If the STUN ID is
saved at the Radio, the Radio can’t be used even though the power on/off. After receiving the UNSTUN
ID, you can use the Radio.
Figure 8-7) STUN
8.11 Programming function
The Programming is the function for input of the data such as Frequency/Tone/Scan into
the Radio.
* Programming Method
First, please prepare the Program cable for XR Series Radio.
① Press the “P” button of the Radio to turn on. Then, the –Program Mode is displayed.
② Connect the Programming cable to the Ear/Microphone Jack of Radio.
③ By using the PC Program, store the data and then disconnect the cable.
Turn off the power and turn on the power again.
Figure 8-8) Programming Mode
8.12 Cloning function
The Cloning is to copy the data such as Frequency/Tone/Scan into the other Radio.
* Cloning Method
① First, please prepare the Cloning cable for XR Series Radio.
② The original Radio should be turned on with pressing the PTT button and the Radio
to be copied should be turned on with pressing the “ P “ button.
③ The original Radio displays Radio’s version and then a clone message is displayed with
change screen.
④ The original Radio displays a < LINE CLON > message and copied Radio displays a
15