User's Manual

④ To out of the Menu mode, press the Menu button (P).
4) Setting ID
This is for transmission of your ID and reception of your party’s ID. ID is divided by DTMF
and Call ID. Especially the Call ID transmits your ID to the party and also, the party’s ID is
displayed on your Radio to use your Radio in convenience and efficiently.
① Enter into the Menu mode.
② By using the channel buttons (▼, ▲), choose the “ ID Setting ” and press the Enter button.
③ After the “DTMF Setting ” message comes out, choose the ON (“y”)/OFF (“n”) by the
channel buttons (▼,▲) and press the Enter button.
④ After the “CALL Setting ” message comes out, choose the ON (“y”)/OFF (“n”) by the
channel buttons (▼,▲) and press the Enter button.
⑤ Select ON(”y")/OFF(“n”) by pressing Channel buttons (▲,▼) and save the selected status
by pressing Enter button.
⑥ To out of the Menu mode, press the Menu button (P).
5) Setting S.Q (Squelch)
Squelch sensitivity level is selectable by 10 steps. Default value set to level 5.
① Enter into the S.Q setting mode.
② By using the channel buttons (▼, ▲), choose the “ S.Q Setting ” and press the Enter button.
19