Instruction manual
CHAPTER ONE
1-2
[6] READ HEAD - is the component that contains the optics which
comes in contact with your film when taking measurements.
[7] POWER SWITCH - turns the unit ON (1) and OFF (0).
[8] VOLTAGE SELECTION SWITCH - selects 115V or 230V
operation.
[9] FUSE HOLDER - holds the proper fuse.
[10] POWER INPUT - is where the 115V/230V AC line cord plugs in.
[11] REFLECTION HEAD INPUT - is used to connect optional
Reflection Head (see "Optional Equipment" in Chapter 8).
[12] I/O PORT - is used for RS232 bi-directional serial
communications.