Instruction manual

361T
DENSITOMETER
2-1
2. User Interface
Key Description
The Keyboard consists of three key switches, the [FUNCTION] d key,
the [
COLOR] c key, and the [ZERO] dc key.
FUNCTION
• Selects Density, +Dot, and −Dot.
NOTE: Sequence function is disabled from the factory, and will
not be displayed during function selection. If you want
Sequence enabled refer to "Setting the Sequence Structure" in
Chapter 5.
• Decreases numeric values when used with [ZERO] key.
• Depressed together with [
COLOR] to enter Calibration or
Modes.
COLOR
• Selects either Ortho or UV Filters during normal operation.
• Increases numeric values when used with [
ZERO] key.
• Depressed together with [
FUNCTION] to enter Calibration or
Modes.
ZERO
• Zeros density or Dot during a measurement.
• Used in conjunction with [
FUNCTION] or [COLOR] to
numerically enter a value.
NOTE: If you get lost while selecting functions or don't know
exactly where you are during a certain procedure. PRESS THE
[FUNCTION] KEY as many times as it takes until you get back
to a main level function (Den, +Dot, or −Dot).