Instruction manual

CHAPTER TWO
2-2
DISPLAY CONTRAST
• Rotate the wheel to the back (+) to increase contrast or to the
front (-) to decrease contrast.
Function Selection
The [FUNCTION] key normally selects between one of three functions;
DEN, +DOT, or -DOT. They are sequentially selected with each
momentary depression of the [
FUNCTION] key. Once the function you
want is displayed, wait for the 361T to automatically drop into the
function selected (approximately a 2 second waiting period). At this
point, the previous measurement is displayed.
DEN
+DOT
-DOT
c #.##D
color
value
Density
wait 2 sec.
c ## %
+Dot
wait 2 sec.
c ##
-Dot
wait 2 sec.
Function
Displayed
If the Sequence Function is activated (see "Setting the Sequence
Structure" in Chapter 5), SEQUENCE will be displayed between -DOT
and DEN.