Instruction manual

MODE SELECTION
5-3
The procedure for setting the I/O port options is shown below.
1. Depress [
FUNCTION] and [COLOR] keys at the same time until "N
Dcal Y" is displayed.
2. Depress [
FUNCTION] for NO.
3. Depress [
FUNCTION] for NO.
4. Depress [
ZERO] for YES.
5. Depress [
FUNCTION], "↓ I/O Y" is displayed.
6. Press [
ZERO] to advance to RCI. Each depression of the [ZERO]
key will alternate between RCI OFF and RCI ON.
7. Press [
FUNCTION] to advance to FUNCTION RPT. Each
depression of [ZERO] key will alternate between RPT ON and RPT
OFF.
8. Press [
FUNCTION] to advance to P5. Each depression of [ZERO]
key will select between P5: Busy, CTS, or OFF.
9. Press [
FUNCTION] to advance to BAUD. Each depression of
[ZERO] will page thru BAUD 2400, 4800, 9600, OFF, 300, 600,
and 1200.
10. Press [
FUNCTION] to advance to FUNCTION HDR. Each
depression of [ZERO] key will alternate between HDR ON and
HDR OFF.
11. Press [
FUNCTION] to advance to FUNCTION DPT. Each
depression of [ZERO] key will alternate between DPT OFF and
DPT ON.
12. Press [
FUNCTION] to advance to FUNCTION COMP. Each
depression of [ZERO] key will alternate between COMP OFF and
COMP ON.
13. Press [
FUNCTION] to advance to FUNCTION CR. Each depression
of [ZERO] key will alternate between CR LF and CR.
14. Press [
FUNCTION] four (4) times and the 361T returns to normal
operation.