Instruction manual

361T
DENSITOMETER
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
NOTE: Shielded interface cables must be used in order to maintain compliance with the
desired FCC and European emission requirements.
Industry Canada Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
AVERTISSEMENT : Des câbles d'interface blindés doivent être utilisés afin de se
conformer aux règlements européens et FCC (USA) sur l'émission.
CE DECLARATION
Manufacturer's Name: X-Rite, Incorporated
Manufacturer's Address: X-Rite, Incorporated
Siemensstraße 12b
63263 Neu-Isenburg • Germany
Phone: +49 (0) 61 02-79 57-0
Fax: +49 (0) 61 02 -79 57-57
Model Name: Densitometer
Model No.: 361
Directive(s) Conformance: EMC 89/336/EEC LVD 73/23/EEC
RoHS/WEEE
X-Rite products meet the Restriction of Hazardous Substances (RoHS)
Directive 2002/95/EC and European Union – Waste Electrical and
Electronic Equipment (WEEE) Directive 2002/96/EC. Please refer to
www.xrite.com
for more information on X-Rite’s compliance with the
RoHS/WEEE directives.