Instruction manual

CHAPTER SIX

6-4

J [KEY ENABLE] is used to enable or disable all keys (with the

exception of the Read button) from altering the operation of the

unit. This switch enables or disables the keys by the 361T receiving

the following as the Address and Action Code portions of the string:

J______

Keys enabled

________

1 = keys enable

0 = keys disable

NOTE: This switch will reset itself to "keys enable" each

time the unit is turned on by applying power or by

executing a "P" command from RCI.

K [KEY DEPRESSION] is used to enable the 361T to transmit a K

plus a number to indicate which key has been depressed. This

switch is enabled or disabled by the 361T receiving the following as

the Address and Action Code portion of the command string. The

"KEYS ENABLED" switch (J) must be set to disable for the "K"

code to function.

K______

Keys enabled

________

1 = keys enable

0 = keys disable

When enabled, the 361T will transmit the following when a key is

pressed.

K1 = Function key

K2 = Color key

K3 = Zero key

K4 = Read button

In addition, a Carriage Return <CR> or a <CR> and a Line Feed

<LF> will be sent after KX depending on how CR / CR LF is set in

Modes.

NOTE: This switch will reset itself to KEY DEPRESSED

DISABLE" each time the unit is turned on by applying

power or by executing a "P" command for RCI.