Instruction manual

SERIAL INTERFACE
6-9
Internal RAM Data Addresses
The Internal RAM Data Addresses are used to access parameters not
handled by action codes. The following list covers the most commonly
used parameters, their addresses, and a bit map for each address. In
addition, there are several notes that indicate the limitations and cautions
that must be followed in using these addresses.
NAME BIT # FUNCTION
Mode (Address 2AH) 0 Sequence Unlocked
Enabled when Bit = 1 1 x10
2 Lamp 2 Hour Shut-off
3 RCI on
4 Seq. print format Bit 2
5 311
6 SEQ Color Lock
7 Seq. print format Bit 1
Seq. Print Format
BIT 1 BIT 2
Seq. Each 1 X
Seq. Order 0 0
Seq. Class 0 1
Color 0 Ortho
(Address 2CH) 1 UV
Enable when Bit = 1 2 0
: :
7 0
I/O 0 Pin5: CTS = 1, BUSY = 0
(Address 2E) 1 Pin5: OFF = 1
2 DPT ON = 1
3 Baud Off = 1
4 CR LF = 1
5 COMP ON = 1
6 RPT ON = 1
7 HDR ON = 1
X = Don't Care