Instruction manual

APPENDIX
8-3
Optional Equipment
There are six models of the 361 Reflection Head that are available to
interface with the 361T Transmission unit.
Model 361G-06 Color Reflection Densitometer w/ G and T
Response, 3.4mm Aperture
Model 361GS-06 Color Reflection Densitometer w/ G and T
Response, 1.7mm Aperture
Model 361G/LP-06 Color Reflection Densitometer w/ G and T
Response, 3.4mm Aperture, & Polarizing Filter
Model 361E-06 Color Reflection Densitometer w/ E and N
Response, 3.4mm Aperture
Model 361ES-06 Color Reflection Densitometer w/ E and N
Response, 1.7mm Aperture
Model 361E/LP-06 Color Reflection Densitometer w/ E and N
Response, 3.4mm Aperture, & Polarizing Filter
NOTE: The Reflection Heads listed come with all necessary
cables, instructions, and accessories to connect to the
361T.
G - represents the normal X-Rite Graphics Arts wideband response. It is
similar to Status T response but has more sensitivity to denser
yellow inks.
T - represents ANSI Status T Computerized Color Response™
(CCRTM), for use with the *T-Ref color reference.
E - represents a European response which uses a 47B filter for yellow.
N - represents Narrow Band Glass Interference Type Computerized
Color ResponseTM. This response is computer corrected and
designed for use with process inks on paper. Measurements other
than process inks may yield answers with slight discrepancies.
* T-Ref is a trademark of GCA (Graphic Communication Association).