Operator`s manual

CHAPTER FIVE
5-50
Measuring Samples in Statistics Mode
1. Center target window on sample and lower
instrument to take a measurement. Calculation data
appears and the measurement counter increments.
2. Continue with additional measurements.
Other statistical data is viewed by pressing the Enter key #
with the current calculation (Mean, 1 Sigma, etc.)
highlighted, or by toggling the various measurement modes.
NOTE: Statistical data remains in the instrument until a measurement
is taken with Sample highlighted. This will reset the counter and
clear the statistical data.
PAPER INDICES
Sample
Mean
Br 1%
Ct 1%
n 1
<Completed>
T
Measurement Counter
Current Calculation