Operator`s manual

CHAPTER FOUR
4-2
Language
The Language configuration allows you to select the
language you want to display on your instrument.
To select a language:
1. Use the Tab keys $@ to highlight Language.
2. Press the Enter # key to access the
Language editor.
3. Use the Tab keys $@ to highlight the desired language.
4. Press the Enter key # to save the selected language. The
instrument restarts with the selected language active.
NOTE: If the AC adapter is not plugged into the instrument, press
any key to reactivate the instrument after language selection.
Active Functions
The Active Functions configuration allows you to select
the functions that are available in the main menu.
To enable or disable functions:
1. Use the Tab keys $@ to highlight Active
Functions....
2. Press the Enter # key to access the
Act.
Functions
editor.
3. Use the Tab keys $@ to highlight the desired function.
4. Press the Enter key # to toggle the function active or
inactive. The > indicates the function is enabled.
CONFIGURATION
Language :English
Active Functions...
Density Opt :T
Color Option:CIE
Cal Options :24 hrs
↓
CONFIGURATION
Language :English
Active Functions...
Density Opt :T
Color Option:CIE
Cal Options :24 hrs
↓
English, Deutsch, Español,
and so on.
Density, Dot, and
so on