Operator`s manual

CHAPTER FOUR

4-8

• Status E⎯European status utilizes the Wratten 47B

filter—for higher readings in yellow⎯instead of the

Wratten 47 filter typically used in North America.

• Status A⎯ANSI Status A Response is used in the

photofinishing applications.

• Ax, Tx, and Ex responses closely match the X-Rite

400 series responses.

• Status I ⎯Spectrodensitometric Response is computer

corrected and designed for use with process inks on paper.

Measurements other than process inks may produce

measurement data with slight discrepancies.

• HIFI—HiFi Color™ represents a response from

Status E filters with additional band-width filters for

HiFi Color™ (red, green, blue, and orange).

To select a density status:

1. Use the Tab keys $@ to highlight Status.

2. Press the Enter key # to access the

Status editor.

3. Use the Tab keys $@ to highlight the desired status.

4. Press the Enter key # to save your setting and return

to the Density Options menu.

Precision

Two display formats are available; normal precision (the

default) and high precision. High precision simply adds

another decimal place of resolution to the displayed data

values. This also affects the precision of the data

transmitted out the RS-232 port for Auto Xmit.

Density Options

Status :T

Precision:Normal

Gray Set :Standard