Operator`s manual

CHAPTER FOUR
4-10
• Standard - Normal measurement functionally occurs in
auto color mode. This is the instrument’s factory setting.
To select a gray set scale:
1. Use the Tab keys $@ to highlight Gray Set.
2. Press the Enter key # to access the
Gray Set editor.
3. Use the Tab keys $@ to highlight the desired setting,
10 Scale, 20 Scale, or Standard.
4. Press the Enter key # to save your setting and return
to the Density Options menu.
Calibration Options
The Calibration configuration allows you to determine the
following settings:
• Full Calibration – Updates the white and black
calibration points in your instrument. Refer to Section
Three for the procedure.
• Enter Reflectances – Manually enter reflectance values
for white calibration.
• Cal Alert – Enable a calibration alert and set how often
the instrument will alert you to perform a calibration.
To open the Calibration Options menu:
1. Use the Tab keys $@ to highlight Cal Options.
CONFIGURATION
Language :English
Active Functions...
Density Opt :T
Color Option:CIE
Cal Options :24 hrs
↓
Density Options
Status :T
Precision:Normal
Gray Set :Standard
<Edit Options>