Operator`s manual

SETTING INSTRUMENT CONFIGURATION
4-15
Separator
To determine the separator character:
1. Use the Tab keys $@ to highlight Separator.
2. Press the Enter key # to access the editor.
3. Use the Tab keys $@ to highlight the desired separator.
4. Press Enter key # to save the setting and return to
the Serial Port menu.
Delimiter
To determine the delimiter character:
1. Use the Tab keys $@ to highlight Delimiter.
2. Press the Enter key # to access the editor.
3. Use the Tab keys $@ to highlight the desired delimiter.
4. Press Enter key # to save the setting and return to
the Serial Port menu.
Protocol
To set the protocol:
1. Use the Tab keys $@ to highlight Protocol.
Serial Port
Baud Rate :9600
Hand Shake :Off
Auto XMT :Off
Separator :Comma
↓
<Edit Options>
Serial Port
↑
Auto XMT :Off
Separator :Comma
Delimiter :CRLF
↓
<Edit Options>
Serial Port
↑
Separator :Comma
Delimiter :CRLF
Protocol :RCI
Emulation :Normal
<Edit Options>
Space, Comma,
Tab, CR (carriage
return), CRLF
(carriage return,
line feed), LF
CR (carriage
return), CRLF
(carriage return,
line feed
),
LF