Operator`s manual

CHAPTER FOUR

4-16

2. Press the Enter key # to access the editor.

3. Use the Tab keys $@ to highlight the desired protocol,

RCI or ICP.

4. Press Enter key # to save the setting and return to

the Serial Port menu.

Emulation

To enable emulation:

1. Use the Tab keys $@ to highlight Emulation.

2. Press the Enter key # to access the editor.

3. Use the Tab keys $@ to highlight the desired

emulation mode,

Normal or 400 Series.

4. Press Enter key # to save the setting and return to

the Serial Port menu.

Power Down Option

The Power Down configuration allows you to adjust the

amount of time the unit remains on without any use

before turning itself off. This configuration only affects

the instrument when the charger is not connected. This

value can range from 10 to 120 seconds.

To set the power down time:

1. Use the Tab keys $@ to highlight Power Down.

2. Press the Enter # key to access the

Power Down

menu.

CONFIGURATION

↑

Serial Port :9600

Power Down :120 sec

Speed Read :0 sec

Display :Right

↓

Serial Port

↑

Separator :Comma

Delimiter :CRLF

Protocol :RCI

Emulation :Normal