Operator`s manual

CHAPTER FOUR
4-18
Display
The Display configuration allows you to determine the
following settings:
• Contrast – Set the contrast of the display for optimal
viewing. The setting value can vary from -9 to +9.
• Orientation – Determine whether you want the display
viewable for right-handed or left-handed use.
• Security – Enable or disable the entire Configuration
options menu.
• Unit ID – This unique number identifies the instrument.
This number cannot be changed.
• Battery Status – Lists various voltage conditions and
temperature of the battery. This information would mainly
be used by X-Rite’s Technical Support staff for diagnostic
purposes.
• Error Log – Used by X-Rite's Technical Support to identify
where an error condition occurred in the instrument.
To open the Display options menu:
1. Use the Tab keys $@ to highlight Display.
2. Press the Enter # key to access the
Display menu.
Contrast
To set the display contrast:
1. Use the Tab keys $@ to highlight Contrast.
CONFIGURATION
↑
Serial Port :9600
Power Down :120 sec
Speed Read :0 sec
Display :Right
↓
Display
Contrast :0
Orientation:Right
Security :Off
Unit ID :XXXXXXXX
↓
<Edit Options>