Operator`s manual

SETTING INSTRUMENT CONFIGURATION
4-19
2. Press the Enter key # to access the
Set Display
Contrast
menu.
3. Use the Tab keys $@ to highlight the contrast digit (arrows
above and below designate the selection). Press the Enter
key # to access the number editor.
NOTE: Positioning the arrows above and below + or – and pressing
the Enter key # toggles between the two symbols.
4. Use the Tab keys $@ to highlight desired number and
press the Enter # key to exit editor.
5. Highlight Update Screen and press the Enter key # to
immediately view your setting. Highlight Save & Exit
and press the Enter # key to save your setting.
Orientation
To set the instrument orientation:
1. Use the Tab keys $@ to highlight Orientation.
2. Press the Enter key # to access the editor.
3. Use the Tab keys $@ to highlight the desired
orientation,
Left or Right.
4. Press Enter key # to save the setting and return to
the Display menu.
Security
To enable or disable the entire Configuration menu:
1. Use the Tab keys $@ to highlight Security.
Display
Contrast :0
Orientation:Right
Security :Off
Unit ID :XXXXXXXX
↓
<Edit Options>
Display
Contrast :0
Orientation:Right
Security :Off
Unit ID :XXXXXXXX
↓
<Edit Options>