Operator`s manual

CHAPTER FIVE

5-4

To measure paper:

1. If not selected, press the Tab Up key $ or Tab Down

key @ to highlight Paper. <Measure Paper>

appears in the user dialog. The paper values

displayed are the current values set in the instrument.

2. Center the instrument target window over a sample of the

paper, and lower the instrument to take a reading. Hold

instrument down until <

Completed> is displayed.

3. The paper values are updated and the display

highlight advances to Sample.

NOTE: If HiFi status is used, press the Enter key # when Paper is

highlighted to view the YRGBO values.

Measuring/Editing a Density Reference

The reference function is used to enter density reference

data into the instrument using a sequence or match

method. Up to 16 references can be stored and accessed in

the instrument. Density reference values are then

compared to density measurements and the difference

displayed. The instrument maintains separate density data

for each reference.

To measure a reference:

1. If not selected, press the Tab Up key $ or Tab Down

key @ to highlight Reference. Press the Enter key #

to access the reference menu.

DEN-REF01

Options

Paper

Sample

Reference

V 0.06

C 0.06

M 0.06

Reference Seq

Ref 01

Ref 02

Ref 03

Ref 04

V 1.36

C 1.23

M 1.50

Y 1.65