Operator`s manual

CHAPTER FIVE
5-24
Dot Measurement Mode
Your instrument can evaluate dot data two different ways:
as Dot Area or Dot Gain. Pressing the Enter key # with
the Dot mode highlighted alternates between Dot Area
and Dot Gain. The percentage displayed next to dot gain
indicates the reference percentage used for the last tint
measured.
Setting Options
Pressing the Enter key # with the Options menu
highlighted opens the Dot Options menu. The color,
reference (1, 2, 3), nFactor, and 50% dot calibration are
selected under the Options menu item.
Color
You can choose from two different methods using the dot
function. Auto measurement method measures all the colors,
then displays the most dominant color. Single color
measurement method measures and updates the specific color
you selected. Red, Green, Blue, and Orange only appear when
HiFi status is selected.
DOT AREA Options
Paper
Solid
Tint
>DOT ARE
V 37%
<Select Mode>
T
DOT GAIN—25%
Dot Options:
Color: Auto
nFactor: Off
50% Cal...
Ref1 : 25
^
<Edit Options>
1% - 45% and Off
A
uto, V, C, M, Y, R, G, B, O
45% - 65% and Off
65% - 100% and Off
A
rrow indicates
additional options
Dot Options:
↑
50% Cal...
Ref1 : 25%
Ref2 : 50%
Ref3 : 75%
<Edit Options>
Off or On and adjustment
(0.500 – 9.900)
Used to access 50%
Dot Cal procedure