Operator`s manual

INSTRUMENT FUNCTIONS
5-33
3. Center the instrument target window over the black
patch and lower the instrument to take a reading.
4. Measure the solid cyan patch.
5. Measure the solid magenta patch.
6. Measure the solid yellow patch.
7. The Dmax values are display when Dmax is
highlighted in the measurement list. Press the Escape
key ! to return to the Trap Function display.
To manually edit Dmax values:
1. If not selected, press the Tab Up key $ or Tab Down
key @ to highlight Dmax in the main Trap function.
2. Press the Enter key # to move the highlight to the
data side of the screen. <
Enter Dmax> appears in
the user dialog.
3. Press the Tab Up key $ or Tab Down key @ to
highlight desired ink. Press the Enter key # to access
Dmax menu.
4. Use the Tab keys $@ to choose the desired digit
(arrows above and below designated selection). Press
the Enter key # to access the editor.
NOTE: Highlighting Clear and pressing the Enter key # is a quick
method to zero the value.
5. Use the Tab keys $@ to highlight the desired number
and press the Enter key # to exit the editor.
6. When editing is completed, use the Tab keys $@ to
highlight Save & Exit and press Enter key #.
TRAP DMAX Options
Black
Cyan
Magenta
Yellow
Dmax
V 1.58
C 1.59
M 1.58
Y 1.65
<Measure Black>
T