User's Manual

RS232 I/O setup...continued

3) Select "YES", press

[DIF]

> The basic procedure for the following steps is to press [TOGGLE] to set the I/O

parameter. Press [NEXT] to advance to the next step.

4) Select RCI ON or OFF.

5) Select the BAUD Rate.

6) Select Carriage Return with

or without Line Feed.

7) Select HANDSHAKE OFF, PIN

5 CTS, PIN 5 BUSY, or

XON/OFF ENABLED.

Exit via [NEXT] OR press

[FUNCTION] & [ILLUM] at

the same time to return

back to normal operation.

FUNCTION ILLUM

DIF

CAL

SETUP I/O ?

YES

PRESS

OFF

CR WITH LF

CR WITH NO LF

HANDSHAKE OFF

BACK TO STEP 3

300

600

1200

2400

4800

9600

PRESS

RCI ON

PRESS

BAUD 1200

PRESS

CR WITH LF

PRESS

HANDSHAKE OFF

TOGGLE

PIN 5 CTS

PIN 5 BUSY

XON/XOFF ENABLED