User's Manual

Overview and Setup
1-51-5
UNLOCKING/LOCKING THE SHOE
To take measurements with the instrument, you must unlock the
Shoe (see Instrument Vocabulary drawing in previous chapter).
When the instrument is not in use, the Shoe should be re-locked to
protect the instrument optics.
A sliding button on the bottom of the instrument locks the Shoe
closed.
To unlock, hold Shoe against the unit and slide the lock button back
until the button latch clears the Shoe tab. Carefully release the Shoe
to open. (Figure 1-1)
To lock, hold the Shoe against the unit and slide the lock button
forward until the button latch captures the Shoe tab. (Figure 1-2)
Figure 1-1 Figure 1-2
Button Latch
Shoe Tab
Latch
captures Tab