User's Manual

Overview and Setup
1-91-9
ADJUSTING THE DISPLAY ANGLE
You can most clearly read the LCD display by viewing it at a 90º
angle. The angle of the display can be adjusted to accommodate this
for different user sight lines.
To adjust the display angle:
1. Set the Display Angle Adjustment Knob on the right side of the
instrument to its midpoint setting. (Figure 1-6)
Figure 1-6
2. Activate the display by taking a measurement or pressing a
control button.
3. Adjust the Display Angle Adjustment Knob until the displayed
data can be most clearly seen from your line of sight.
Display Angle
Adjustment Knob