User`s manual

Settings: Formulation

1. Menu: „Settings“ → „Formulation“

a. Adjustment of the formula: In „Addition-Mode“ the adjustment quantities

are shown as second row in the main menu. In „Basic formula-Mode“ the

adjustment quantities are immediately added to the quantity of the basic

formula..

b. Formula edition: The available options depend on the printing process

and the installed modules. Following are possible: „Printable colors“,

„Master colors and dissolvent“ and „Basic material“.

c. Control of the coverage: „no (only color optimization)“ is the usually used

setting. Are colors with partial or complete coverage available and was

the assortment threaded in by white and black there could be fixed a

specific draft regarding the coverage on the basis of another setting.

d. Coat thickness (Coloring calibration = 100%): If there is a difference of the

coat thickness between the coloring calibration and the printing process

there could be done a general adjustment by an adaption of the

percentage values.

e. Furthermore the user has the option to turn off several steps of the

formulation. You can i.e. deactivate the window „Choice of color“.

2. Close the window with “Cancel“.