™ IconRemote (Single User) Owner’s Manual Model IR18A
Table of Contents Introduction ...................................................... 3 Button Functions ............................................... 4 DVD/SAT Functions .................................... 6 Setup ............................................................... 7 Battery Installation ....................................... 7 Battery Saver ............................................... 7 Code Saver ................................................. 7 Power-On Default .....................
Button Functions (cont.) Button Functions 1. 25. 2. 24. 3. 23. 4. 5. 22. 6. 21. 7. 20. 8. 19. 18. 17. 9. 16. 10. 11. 15. 12. 13. 14. Note: REC must be pressed twice to record from your VCR. For some VCR brands, you might need to press REC once, then press it again for 3 seconds. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. These differences depend upon the brand and model of your product.
Button Functions (cont.) Setup Battery Installation SCAN+ and SCAN- control fast forward and reverse. CHAPTER+ and CHAPTER- locate chapters or tracks on a disc. LAST (REPEAT) performs “A-B Repeat” (or RPT A.B) for repeat play of current chapter or track. INFO brings up DVD Display or Control Menu for chapter/track/title number, time remaining/elapsed indication, system information, etc. MENU brings up the DVD disk menu screen; use with UP, DOWN, LEFT, and RIGHT. OK is used for on-screen Menu selection.
Code Search Direct Code Entry 1. Press and hold SETUP until the indicator remains on, then release SETUP. 2. Repeatedly press SELECT to select the desired mode (TV, VCR, etc.), unless the desired mode is already selected. 3. Enter the 4-digit code from the code tables (on separate sheet). Note: After a valid code entry, the indicator turns off. For an invalid code, the indicator flashes. 4. Press CHANNEL UP. If the device responds, no further programming is required.
Setting Favorites The Favorites feature is what really sets this remote apart from other remotes. It lets you go to your favorite channel(s) by simply pressing a button next to a sticker (or label) that represents that favorite channel. Setting Favorites (cont.) FAVORITE buttons FAVORITE icons 1. Press and hold SETUP until the indicator remains on, then release SETUP. 2. Repeatedly press SELECT to select the desired mode (TV, VCR, etc.), unless the desired device is already selected.
Setup Setup (cont.) Programming Combo Device Codes Some combo (combination) devices (TV/VCR, TV/DVD, DVD/VCR, etc.) require you to set up 2 different modes to control both parts of the combo. For example, if you have a TV/DVD combo, you might need to set up one code under the TV mode to control the TV and a separate code (under other modes) to control the DVD.
Code Learning Your remote is equipped with an easy “learning” feature that lets it “learn” features (such as RANDOM PLAY from your original CD remote). Tips On Learning (cont.) • Keys that you normally give a quick press (like the Tips On Learning You can only learn one device type under any one mode button e.g. only learn TV codes under the TV mode, VCR codes under the VCR mode, etc.
IR Transmitter Finder Learning Commands This feature assists you in identifying where your original remote’s infrared (IR) transmitter is located. The learning feature lets your remote “learn” functions from your original remote control. This feature is particularly useful if your original remote’s IR transmitter is hidden behind a lens. 1. Press and hold SETUP until the indicator remains on, then release SETUP. 2. Repeatedly press and release SELECT to select the desired mode (TV, VCR, etc.). 3.
Clearing Commands INPUT To Clear All Learned Commands Under a Mode When in TV mode, INPUT performs the INPUT sourceswitch function. Clearing learned commands is helpful if you replace your CD player with another brand or model, for example. If your remote had learned a feature (such as RANDOM PLAY) from your old CD player’s original remote, that feature would no longer work for your new CD player. When in a mode that has been programmed for VCR, INPUT performs the TV/VCR antenna-switch function.
X10.COM, A DIVISION OF X10 WIRELESS TECHNOLOGY, INC. 3824 NORTH 5TH ST., SUITE C, NORTH LAS VEGAS, NV 89032 WEB SITE: HTTP://WWW.X10.
