4 X250-28 X250-27
All instructions, warranties and other collateral documents are subject to change at the sole discretion of our company. For the latest information please visit our company website www.xk-innovations.com Read the entire instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury.
Warning and Battery Guide 1-cell 3.7V variable rate DC LiPo charger Instructions: The Battery charger included with the X250 has been designed to safely charge the LiPo battery. CAUTION: All instructions and warnings must be followed exactly. Mishandling of LiPo batteries can result in fire, personal injury and/or property damage. 1. By handling, charging or using the included LiPo battery you assume all risks associated with lithium batteries. 2. Do not exceed the recommended charge rate. 3.
Photo and Video functions are only applicable when you have a 5.8GHz Camera with a memory card connected. Insert the battery into the quadcopter, the battery slides into the holder from the front to the back. Connect the battery up and place the quadcopter on a flat level surface. The X250 LED’s will flash fast and then slow to a blink to show the quadcopter is ready bind to the handset.
Roll & Flips If you are not familiar with the controls of the X250 please take a few minutes to familiarize yourself with them before attempting your first flight. Throttle To active headless mode you have to press and hold down the CF button for 3 seconds. Once CF/Headless mode is active the transmitter will emit a slow constant beep to show it is in headless mode, the rear LED on the X250 will also flash to show headless mode is active.
Quadcopter has problems with inconsistent left/right manoeuvres 1. Damaged rotor(s) 2. Damaged motor(s) 1. Check and replace any damaged rotor(s) 2. Check and replace and damaged motor(s) Strong vibrations on the quadcopter Rotors damaged Replace the main rotors Quadcopter drifts after trim adjustment during hover Gyro/Accelerometer is out of calibration Perform the Gyro/Accelerometer calibration The quadcopter fails to fly at all. 1. Motors damaged 2. Main gears loose 1. Replace damaged motor 2.
X250-01 XK250 LIPO BATTERY 780MAH 3.
