User's Manual

User Manual Automotive Ethernet Converter
16
Update firmware
 Click .
 Navigate to the directory that contains the firmware file and select the File name.
(Never change the file names of the provided firmware archive.)
 Click Open.
The firmware is being updated.
Complete firmware update properly
Do not abort the process and do not disconnect the USB cable prematurely.
Otherwise, the converter stays in USB bootloader mode and it is not con-
verting data.
After the successful transfer, the converter switches back into standard mode, which is indi-
cated by green illumination of the general status LED (D).
 Pull the USB cable from the converter.
Disconnect converter
Manual disconnection of the converter is only necessary if you did not transfer a configura-
tion or update the firmware after connecting.
 Click to disconnect the converter.
 Pull the USB cable from the converter.
 Press the reset button (J) to switch back into standard mode.