User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety and warranty
- 3 Product description
- 4 Commissioning
- 5 XorayaSuite
- 6 Maintenance
- 7 Storage, transport and disposal
- 8 Appendix
USER MANUAL
XORAYASUITE
110
5.6 Resetting to factory defaults
For unwanted or defective system or interface configurations, it is
recommended to reset the ML-N4000 back to its factory defaults.
In the Logger menu, click Reset configuration to factory settings to
reset the system configuration or one or all interfaces to their factory
defaults.
or
Press the default button (D) for at least 3 seconds to reset all ML-
N4000 settings. (➔ Connections and controls)
The ML-N4000 goes into idle state by way of confirmation.
The configuration is reset.
Updating the firmware
Factory setting are automatically restored whenever
features are added or eliminated upon a firmware update.
(➔ Firmware-Update)
Therefore, you should check your configuration status
after each firmware update.