User's Manual

USER MANUAL
SAFETY AND WARRANTY
12
CAUTION
Device damage due to penetration of dust or liquids
Dust or moisture inside the ML-N4000 may cause
abnormal behaviour or destruction of the device.
 Only operate the ML-N4000 with a closed housing.
 Do not operate the ML-N4000 outdoors.
 Do not operate the ML-N4000 outside the specified
temperature range.
 Turn off the ML-N4000 and disconnect it from the
power supply before you start cleaning.
CAUTION
Damage due to improper device shutdown
Disconnecting the power supply during operation may
cause data loss and destruction of the ML-N4000.
 Never disconnect the ML-N4000 from the power
supply while in operation.
 Ensure proper connector seating and tighten the
screws if possible.
 Only shut down the ML-N4000 through the
XORAYASuite or the power button on the front panel.
 Pull the black plug connected to ground last when
disconnecting the ML-N4000 from the power supply.
CAUTION
Safety defects due to incorrect accessories and spare
parts
Accessories and spare parts that have not been
recommended by X2E GmbH negatively affect the safety,
functionality and precision of the ML-N4000.
X2E GmbH shall assume no responsibility whatsoever or
honour any warranty for damages arising from non-
recommended accessories and spare parts or incorrect
use.
 Use only accessories recommended by X2E GmbH
and original spare parts.