User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety and warranty
- 3 Product description
- 4 Commissioning
- 5 XorayaSuite
- 6 Maintenance
- 7 Storage, transport and disposal
- 8 Appendix
USER MANUAL
PRODUCT DESCRIPTION
15
3 Product description
The XORAYA dataloggers are processor-controlled storage units, designed to
record data from several and different data sources simultaneously. These
dataloggers are indeed unique in the automotive industry thanks to their
central 100-ns timestamp on all interfaces. Furthermore, its modular design
allows for a rapid and flexible adjustment to future demands. This is
stressed by the fact that all product phases, i.e. from design and
development to programming and production, are completed in-house.
The dataloggers can be equipped with many different interfaces:
▪ Lowspeed-CAN, Highspeed-CAN and CAN-FD
▪ FlexRay
▪ LIN
▪ RS-232
▪ PSI5
▪ Analog
▪ BroadR-Reach
▪ MOST25 and MOST150
▪ Ethernet 100Base-T and 1000Base-T
▪ GNLog and DLT via Ethernet and RS-232
▪ CCP and XCP
▪ GPS
The ML-N4000, based on the Xilinx Zynq® UltraScale+™ MPSoC, is the new
generation of the compact and inexpensive XORAYA datalogger. The built-in
supercapacitor unit is able to bridge power fluctuations and to shut the ML-
N4000 down safely in case of power failures.
Data can be directly saved to the storage medium (internally or externally)
or to a computer system via Ethernet interface. Both modes can also be
operated in parallel.
Operation can be managed via the graphical user interface XORAYASuite,
whereby the ML-N4000 can be configured, and data recorded and
downloaded from the ML-N4000. Moreover, you can evaluate the recorded
data and export them to many popular formats.