User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety and warranty
- 3 Product description
- 4 Commissioning
- 5 XorayaSuite
- 6 Maintenance
- 7 Storage, transport and disposal
- 8 Appendix
USER MANUAL
COMMISSIONING
25
4 Commissioning
4.1 Unpacking
Upon unpacking, check whether the delivery is complete and all components
appear in perfect condition. (➔ Scope of delivery)
Please contact X2E GmbH immediately should the delivery be
incomplete or upon damaged components.
Do not put any defective component into operation.
X2E GmbH can only accept your complaint and replace the affected
component upon prompt notification.
Keep original packaging
Keep the original packaging and packing materials for
later storage or further transport.
4.2 Selecting an installation location
The ML-N4000 installation location must meet the following criteria:
▪ Location of the DC power supply (12 V)
▪ Distance of at least 4 cm to other devices
▪ Solid and stable base
▪ Adequate airflow
▪ ML-N4000 front and back sides must not be covered
4.3 Installing the ML-N4000
Install the ML-N4000 in vertical position with the front side up to ensure the
best possible heat dissipation.
Furthermore, install the ML-N4000 in the vehicle so as to avoid a damage
risk at any time.