User's Manual

USER MANUAL
XORAYASUITE
34
5.2.2 Logger
Among other things, you can use the Logger menu to connect or disconnect
the ML-N4000 with the XORAYASuite.
Command
Description
Connect
Connects the selected ML-N4000
Disconnect
Disconnects the active connection to the ML-
N4000
Offline-Logging > Start
Starts the logging process on the ML-N4000
storage medium
Offline-Logging > Stop
Stops the logging process on the ML-N4000
storage medium
Online-Logging > Start
Starts the logging process on the PC
Online-Logging > Stop
Stops the logging process on the PC
Probe-Logging > Start
Starts probe logging
(further information in the quick manual XORAYA
µT-Z7/Probe)
Probe-Logging > Stop
Stops probe logging
Save changed configuration
permanently
Stores the changed settings permanently on the
ML-N4000
Customer default
configuration > Create
Stores the current permanent configuration
(profile active) in the customer-default profile
Customer default
configuration > Load
Loads the customer-default configuration profile
into the active profile
Reset configuration to factory
settings > Interfaces
Resets the ML-N4000 interface configuration to
factory defaults
Reset configuration to factory
settings > System
Resets the ML-N4000 system configuration to
factory defaults
Format HDD
Formats the ML-N4000 storage medium
Synchronize time with >
Local
Sets the system time of the ML-N4000 to the
current system time of the PC
Synchronize time with >
Vehicle
Sets the system time of the ML-N4000 to the
current system time of the connected vehicle
Restart
Restarts the ML-N4000
Restart and reconnect
Restarts the ML-N4000 and reconnects
Shutdown
Puts the ML-N4000 in sleep mode
Shutdown (no wake up)
Shuts down the ML-N4000 completely
This menu does not appear in the Viewer and Convert tools.