User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety and warranty
- 3 Product description
- 4 Commissioning
- 5 XorayaSuite
- 6 Maintenance
- 7 Storage, transport and disposal
- 8 Appendix
USER MANUAL
XORAYASUITE
37
5.4 Connecting and disconnecting the ML-N4000
The ML-N4000 is connected and disconnected in the same way regardless of
the XORAYASuite tool. This section shows the process for the Configuration
tool as an example.
5.4.1 Connecting the ML-N4000
1
Display available loggers
6
Display settings
2
Establish connection to logger
Connect the ML-N4000 to the PC.
(➔ Connecting the ML-N4000 to the PC)
Turn on the ML-N4000.
Start the desired XORAYASuite tool. (➔ Starting)
Click Display available loggers (1) to start scanning for dataloggers.
Select the desired ML-N4000 (alternative name: MLZU) using the
assigned name.
Click Establish connection to logger (2).
or
In the Logger menu, click Connect. (➔ Logger)
The ML-N4000 is connected to the XORAYASuite.
Icons and text colours indicate the status of the ML-N4000:
and name red Network error, the ML-N4000 is located on a
different subnet
and name black Disconnected ML-N4000
and name red Another user is connected to the ML-N4000
and name blue You are connected to the ML-N4000
Measurements are currently transferred from
the ML-N4000 storage medium to the PC
ML-N4000 is in favourites list (➔ Favourites)