User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety and warranty
- 3 Product description
- 4 Commissioning
- 5 XorayaSuite
- 6 Maintenance
- 7 Storage, transport and disposal
- 8 Appendix
USER MANUAL
XORAYASUITE
42
You can view the properties sorted either alphabetically or by category.
Properties that cannot be modified by the user are greyed out.
Configuration changes can be saved temporarily or permanently.
Save temporarily:
Change the desired default setting or property.
The configuration is saved temporarily.
Changes to default settings or properties are discarded after the ML-N4000
restarts.
Save permanently:
Click Save changed configuration permanently (4).
or
In the Logger menu, click Save changed configuration permanently.
The configuration is saved permanently.
Delayed change update
For certain settings, such as Name and IP Address,
changes are not applied immediately but only after a ML-
N4000 restart.
The Maintenance symbol indicates whether there is a ML-N4000 malfunction
and, where appropriate, the error source.
HDD mode
Start the recording on the internal or external storage
medium of the ML-N4000 via Start Hdd logging (3) or
autonomously without a PC, as described in the relevant
section. (➔ HDD mode)
Use Display settings (5) to customise the following:
▪ Colour assignments for the interfaces
▪ Load signal description file (➔ Signal description settings)
▪ Load configuration template (Busspec)
▪ Manage logger favourites (➔ Favourites)